dc/dc converters thb 10 series, 10 watt features supplementary and reinforced insulation i/o isolation 4000 vacrms rated for 300 vrms working voltage 2 x moop medical safety according to aami/ansi es 60601-1:2005(r) and iec/en 60601-1 3rd edition industrial safety to ul/iec/en 60950-1 wide 2:1 input voltage ranges extended operating temperature range C40c to 75c max. input flter meets en55022, class a continuous short-circuit protection high reliability 3-year product warranty the thb 10 series is a range of high performance dc/dc converter modules with double reinforced insulation system. it complies to latest medical safety standard iec 60950-1 3rd edition for moop (means of operator protec - tion). the product comes in a 2x1 industry standard package. all 12 mod - els features wide 2:1 input voltage range and fully regulated output voltage. the converters offer an economical solution for demanding applications in industrial and medical instrumentation. order code input voltage range output voltage output current max. effciency typ. thb 10-1211 5.1 vdc 1600 ma 75 % thb 10-1212 9 - 18 vdc 12.0 vdc 835 ma 80 % thb 10-1222 (12 vdc nominal) 12.0 vdc 417 ma 80 % thb 10-1223 15.0 vdc 333 ma 81 % thb 10-2411 5.1 vdc 2000 ma 76 % thb 10-2412 18 - 36 vdc 12.0 vdc 835 ma 81 % thb 10-2422 (24 vdc nominal) 12.0 vdc 417 ma 81 % thb 10-2423 15.0 vdc 333 ma 82 % thb 10-4811 5.1 vdc 2000 ma 76 % thb 10-4812 36 - 75 vdc 12.0 vdc 835 ma 81 % thb 10-4822 (48 vdc nominal) 12.0 vdc 417 ma 81 % thb 10-4823 15.0 vdc 333 ma 82 % models iec 60950 -1 iec 60601-1 page 1 of 3 c b scheme u l 60950 -1 es 60601-1 http://www.tracopower.com
dc/dc converters thb 10 series 10 watt all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. page 2 of 3 input specifications input current at no load 12 v models: 30 ma typ. 24 v models: 20 ma typ. 48 v models: 10 ma typ. start up voltage / under voltage shutdown (hysteresis) 12 vin models: 9.0 / 8.5 vdc (or lower) long term operation with under-voltage may cause demage 24 vin models: 18 / 16 vdc (or lower) 48 vin models: 36 / 34 vdc (or lower) recommanded external input fuse (slow blow) 12 vin models: 3 a 24 vin models: 1.5 a 48 vin models: 0.75 a surge voltage (1 sec. max.) 12 vin models: 25 vdc max. 24 vin models: 50 vdc max. 48 vin models: 100 vdc max. input filter en 55022 class a and fcc, level a output specifications voltage set accuracy 1.0 % regulation C input variation vin min. to vin max. 0.5 % max. C load variation 15 C 100 %: single output models: 1.0 % max. dual output models: 2.0 % max. balanced load minimum load no minimum load required ripple and noise (20 mhz bandwidth) 5 vdc models: 100 mvp-p max. other models: 150 mvp-p max. transient response (25% load step change) 600 s max. current limitation >120 % iout max. short circuit protection continuous capacitive load 5 vdc output models: 1000 f max. 12 vdc output models: 470 f max. dual output models: 220 f max. (each output) isolation / safety standards isolation test voltage (flash tested 1 sec.) 6000 vpk i/o isolation voltage (50hz, 60sec.) 4000 vac leakage current (at 240vac, 60hz) 10 a i/o isolation capacity (at 100khz, 1v) 60 pf typ. i/o isolation resistance (at 500vdc) >10 gohm safety standards iec/en 60950-1, iec/en 60601-1 3rd edition, ansi/aami es60601-1 and can/csa-c22.2 no. 60601-1, medical electrical equipment - part 1: general requirements for basic safety and essential performance safety approvals C cb test certificate according iec 60950-1 www.tracopower.com/products/THB10-cb60950.pdf C cb test certificate according iec 60601-1 www.tracopower.com/products/THB10-cb60601.pdf C ul online certification to ul 60950-1 (entry pending) www.ul.com/database file: e188913 - qqgq2 C ul online certification to es 60601-1 (entry pending) www.ul.com/database file: e188913 - qqhm2 http://www.tracopower.com
sp ec i?cati ons can be changed wi thout noti ce! make sure you are using the latest documentation, downloadable at www.tracopower. com www .tracopower. com dc/dc converters thb 10 series 10 watt outline dimensions rev. november 15. 2013 pin single dual 1 vin (vcc) vin (vcc) 2 -vin(gnd) -vin(gnd) 3 vout vout 4 no pin common 5 -vout -vout pin-out dimensions in [mm], () = inch pin diameter ? 1.0 0.05 (0.04 0.002) tolerances 0.25 (0.01) pin pich tolerances 0.13 (0.005) general specifications temperature ranges C operating C40c to +75c C case +95c max. C storage C50c to +125c derating 2.5 %k above 55c humidity (non condensing) 95 % rel h max. altitude during operation 4000 m temperature coefficient 0.02 %k typ. reliability, calculated mtbf ( m i l- h d b k-217 f @ 25c, ground benign ) 1000000 h switching freuency 150 hz typ. (puls width modulation) casing material non conductive plastic (ul 94v-0-rated) pin material copper alloy with gold plate over nicel subplate eight 24.5 g (0.86 oz) soldering temperature max. 260c 10 sec. page 3 of 3
|
